6,500 G Separation Force
The highest-G model in the Vimfun range for fine, dense solids that settle too slowly under gravity.
Industrial Centrifugation · Product Details
VC-600 High Speed Coolant Centrifuge
VC-600 high speed coolant centrifuge with 6,500 G separation force, 60 L/min rated flow and automatic sludge discharge.
No online payment. Model selection and commercial terms are confirmed for each industrial application.
01 · Why VC-600
Three Reasons to Choose the VC-600
No Disposable Media
Density separation removes the recurring need to buy and replace paper rolls or filter bags in this stage.
Automatic Sludge Discharge
Accumulated solids are discharged automatically to support continuous production and reduce routine cleaning.
Designed for dedicated fluid circuits
The VC-600 is a strong starting point for one machine, one cold heading press or a smaller dedicated sump. Final sizing considers fluid viscosity, temperature, contaminant density, solids generation and required turnover.
02 · How it works
Fluid In. Solids Out. Cleaned Fluid Back.
01Fluid InContaminated coolant or oil is pumped from the sump.026,500 G SeparationThe 8,000 rpm tubular bowl moves denser solids outward.03Clean Fluid OutSeparated fluid returns to the machine or sump.04Sludge OutAccumulated solids leave through the automatic discharge cycle.
The confirmed solids capacity is 2 L. Discharge frequency is set according to the type and amount of contamination generated by the production process.
03 · Confirmed specifications
VC-600 Technical Specifications
| Specification | VC-600 |
|---|---|
| Maximum rated flow | 60 L/min |
| Bowl speed | 8,000 rpm |
| Maximum separation force | 6,500 G |
| Solids capacity | 2 L |
| Installed power | 2.29 kW |
| Overall dimensions | 1500 × 940 × 770 mm |
| Machine weight | 343 kg |
| Standard electrical supply | 380V / 50Hz, three-phase |
| Optional electrical supply | 400V / 50Hz or 480V / 60Hz on request |
| Sludge handling | Automatic sludge discharge |
| Filter media | No disposable media in the centrifugal separation stage |
Pump duty, pipe routing, electrical configuration and controls are confirmed for each project.
Component details
Key Components and Connection Details
Close-up views support installation and maintenance discussions. Final connection, pneumatic and monitoring arrangements are confirmed against the delivered configuration.
Vibration Sensor
A dedicated vibration sensor provides a monitoring point for machine operating condition.
Auxiliary Outlet
The auxiliary outlet is shown for connection and installation review. Final pipe routing is confirmed for each project.
Air Filter & Regulator
The air preparation assembly filters and regulates the pneumatic supply used by the delivered machine configuration.
04 · Best-fit applications
Where the VC-600 Fits Best
Cold Heading Oil
Removes phosphate coating residue and iron fines from a dedicated press or compact oil circuit.
View application →CNC Coolant
Continuous removal of fine chips and swarf from a single machine or smaller machining cell.
Grinding Coolant
High-G separation for fine metallic contamination that settles too slowly under gravity.
Industrial Oil Circuits
For compatible oils carrying separable solids, subject to fluid and temperature confirmation.
When should you choose another model?
Several machines on a central sump may require higher circulation flow or greater solids capacity. Review the Automatic Sludge Discharge series or the Coolant Centrifuge guide.
05 · Model choice
VC-600 or VC-600L?
Choose the standard VC-600 when maximum separation force is the priority. The VC-600L is the low-speed variant for applications where 3,500 G is sufficient.
| Specification | VC-600 | VC-600L |
|---|---|---|
| Bowl speed | 8,000 rpm | 6,000 rpm |
| Maximum separation force | 6,500 G | 3,500 G |
| Machine weight | 343 kg | 337 kg |
| Selection direction | Maximum G force | Lower-speed application |
The VC-600L remains a variant on this page. Selection follows the actual fluid and contamination, not speed alone.
06 · Installation and support
Ready for Your Plant Standard
Voltage Options
380V/50Hz three-phase standard; 400V/50Hz and 480V/60Hz available on request.
System Integration
We review pump duty, pipe routing, service clearance, sump circulation and return position.
Maintenance & Parts
Routine support for the tubular bowl, discharge area, seals and wear parts.
View support →If your plant currently uses disposable media, compare the two methods in Centrifuge vs Paper Band Filter. Warranty, commissioning and spare-parts terms are confirmed in the quotation and order documents.
Get a solution
Is the VC-600 Right for Your Application?
Send us your fluid, contamination, flow, sump volume, temperature and available voltage.
Request a Quote →